Freeze dried fruits and vegetables are fruits and vegetables that have been freeze-dried. They are widely used in the aerospace, military, mountaineering, tourism, exploration, and mining industries, and have found their way into restaurants and homes. The Process flow as following: raw material selection → finishing → pre-freezing → sublimation drying → post-processing → packaging → storage.

(1) Pre-treatment.
General pretreatment refers to all the treatment before sublimation drying, so the freezing before drying also belongs to the pretreatment. Raw material pretreatment and conventional fruit and vegetable drying and freeze-dried fruits and vegetables
are the same. If there is a need for selection, cleaning, peeling, cutting, blanching, cooling and other treatments, we will not go into detail here. When freeze-drying fruit or vegetable juice, it is first concentrated in advance with cheaper processing methods, and then the product is turned into granular form during pre-freezing.
Pre-freezing is to freeze the raw materials after pre-treatment. It is an important process of freeze-drying. As fruits and vegetables in the freezing process will occur a series of complex biochemical and physicochemical changes. Therefore the good or bad pre-freezing will directly affect the quality of freeze-dried fruits and vegetables. The freezing process focuses on the impact of the freezing rate of the frozen material on its quality and drying time.
What are differences between quick freezing and slow freezing?
Quick freezing produces smaller ice crystals and slow freezing produces larger ice crystals. Large ice crystals favor sublimation and small ice crystals do not favor sublimation. Smaller ice crystals have less effect on the cells, the smaller the ice crystals. The more the drying reflects the original organization and properties of the product. However, the freezing rate is high, and the required energy consumption is also high. Comprehensive consideration should be given to select an optimal freezing rate, in order to ensure the quality of freeze-dried food at the same time, so that the required freezing energy consumption is minimized.
(2) Sublimation drying is the core process in the production of freeze-dried fruits and vegetables. It is necessary to control the process conditions:
• Loading
When drying, the wet weight loading of the freeze dryer is the mass that is dried on the drying plate per unit area. It is an important factor in determining the drying time. The thickness of the dried food is also a factor affecting the drying time.
When freeze drying, the drying of the material is advanced from the outer layer to the inner layer. Therefore, when the dried material is thicker, it needs longer drying time. In the actual drying, the dried materials are cut into 15-30mm uniform thickness. The amount of material to be loaded per unit area of drying plate should be determined according to the heating method and the various types of dried food. When industrialized large-scale device is used for drying, if the drying cycle is 6~8h, the amount of material loaded on the drying plate is 5~15kg/m2.
• Drying temperature
Freeze drying, in order to shorten the drying time, must effectively supply the heat required for the sublimation of ice crystals. Therefore, various practical heating methods are designed. Drying temperature must be controlled in order not to cause the melting of ice crystals in the material to be dried, the dried part will not cause thermal denaturation due to overheating within the range. Therefore, in a single heating method, the temperature of the drying plate in the sublimation of the drying of the initial period should be controlled at 70 ~ 80 ℃, drying in the middle of 60 ℃, drying in the late 40 ~ 50 ℃.
• Judgment of drying end point
Drying end point can be used to determine the following indications:
The temperature of the material and the temperature of the heating plate basically converge and remain for a period of time. Pump group (or cold trap) vacuum gauge and drying room vacuum gauge tends to agree, and keep for a period of time. Drying room vacuum gauge cold trap temperature is basically restored to the indicator when the equipment is unloaded and maintained for a period of time. For freeze dryers with large butterfly valves, the large butterfly valve can be closed. The vacuum machine basically does not drop or drops very little. The above four judgment basis, can be used alone, can also be combined or joint use.
(3) Post-processing
Post-processing freeze-dried fruits and vegetables includes unloading, semi-finished product selection, packaging and other processes. After freeze-drying speed, inject nitrogen or dry air into the drying chamber to break the vacuum. Then immediately remove the material in a relative humidity of 50% or less, the temperature 22 ~ 25 ℃. Dust less closed environment unloading, and in the same environment for semi-finished products selection and packaging. Because the lyophilized material has a huge surface area, the hygroscopicity is very strong. Therefore, it is necessary to complete the operation of these processes in a drier environment.

(4) Packaging and storage
After freeze-drying the food has a large surface area, some of the ingredients in the food are directly exposed to the air. It is easy to contact with the oxygen in the air and adsorption of water. This leads to the gradual deterioration of freeze-dried food. Secondly, most of the freeze-dried foods have natural color, and these natural pigments are easy to degrade in the light. In the process of oxidation and pigment degradation, temperature is also an important factor affecting such chemical reactions. Therefore, the packaging of freeze-dried food mainly considers how to prevent or mitigate the impact of the above four factors.
The porous spongy structure of freeze-dried food has both its favorable and unfavorable sides:
• First, once the product is exposed to air, it is easy to absorb moisture and oxidized degradation. Therefore, freeze-dried fruits should be vacuum-packed, preferably nitrogen-filled packaging.
• Secondly, freeze-dried fruits & vegetables occupy a relatively large volume, not conducive to packaging, transportation, sales.
• Therefore, freeze-dried vegetables and fruits is often compressed and packaged. In addition, the porous and loose structure of freeze-dried food in the transportation, sale of the way is very easy to break.
• Therefore, for those freeze-dried foods that are inconvenient to be compressed and packaged, they should have a certain protective effect of packaging materials or packaging forms.
Freeze-dried food commonly used packaging materials for PE bags and composite aluminum platinum bags, PE bags commonly used for large packaging. Composite aluminum platinum bags are commonly used for small packages, the outer packaging are usually selected corrugated cardboard boxes. Its size in line with the needs of containerized transport, with PE bags for the inner packaging, in order to strengthen its role in isolating oxygen, water, steam, commonly used double. If necessary, you can also use tin cans, but the price is higher, the application is not very common. Regardless of what packaging materials, are required to use vacuum nitrogen, and add deoxidizer and desiccant.
Freeze-dried fruits and vegetables should be stored in a cool, dry place, if conditions. It is best to be placed in a low-temperature, low-humidity environment, the shelf life is usually 1 to 2 years, the use of tin cans can be appropriately extended.
Want to get FREE SAMPLES, please contact our specialists at info@gybiotech.com.





